Handcrafted Copper Range Hood

MOTOR FAN IN HOOD EXHAUST SYSTEM

• The motor fan in hood system has the motor(s) inside the copper hood.
• This system comes with lights, switches and stainless steel baffle filters inside the copper hood.
• The liner is 304 grade stainless steel, 120 volts 60hz, and is equipped with reusable stainless steel baffle filters.
• The motor(s) run on an average of 7 sones.

MOTOR FAN IN ATTIC EXHAUST SYSTEM

• The motor fan in attic system has the motor inside the attic.
• This system comes with lights, switches, stainless steel baffle filters inside the copper hood.
• The liner is 304 grade stainless steel, 120 volts 60hz, and is equipped with reusable stainless steel filters.
• The motor runs on an average 7 sone volume
• The attic motor is ideal for those who need a virtually silent system.

NO MOTOR FAN/LINER ONLY EXHAUST SYSTEM

• The No Motor Fan system requires the purchase of a separate External Blower System
• The No Motor system has the motor(s) on the outside of your structure.
• This system comes with lights, switches, stainless steel baffle filters inside the copper hood.
• The liner is 304 grade stainless steel, 120 volts 60hz, and is equipped with reusable stainless steel filters.

Vent Material: Commercial grade SUS304 / 20 gauge

Vent Body Design : Full seamless stainless steel construction

Exhaust Fan Type: Centrifugal blower

Control Type: 4-speed touch electronic control panel with heat sensor

Airflow:

30″/36″-280CFM/390CFM/520CFM/610CFM

42″/48″-385CFM/540CFM/715CFM/1050CFM

54″/60″-460CFM/860CFM/1260CFM

Max.Noise Level:

30″/36″ 1.2Sone(43dB) / 2.8Sone(55dB) / 5.0Sone(63dB) / 7.0Sone(68dB)

42″/48″ 1.5Sone(46dB) / 3.5Sone(58dB) / 5.3Sone(64dB) / 7.5Sone(69dB)

54″/60″ 1.8Sone(35dB)/ 5.5Sone(53dB)/8.5Sone(70dB)

Power Rating: 120V / 60Hz

Wattage: (Delayed power auto shut off)

30″/36″-120W

42″/48″/54″/60″-240W

Duct:

30″/36″-6″round

42″/48″-8″round

54″/60″-10″round

Illumination:

30″/36″-2 x 3W LED lights

42″/48″-3 x 3W LED lights

54″/60″-6 x 3W LED Lights

Filtration Type: Stainless steel 304 baffle filter (reusable, dishwasher-friendly)

ETL Listed: Yes

Mounting Version: Wall mount, Under-cabinet, Island mount  

AKICON will provide a free finish sample to ensure you get copper products' actual colors and textures.
 

Need free sample, please contact service@akiconshop.com



 

Note

Since our products are handmade from copper, small differences in patina and texture can occur. We do not consider product variances as defects.

Apron Design Placement:

Patterns may be centered with a frame or without a frame, wrapped around and full front.

• On full front
• In the center of apron without frame
• In the center of the apron with frame
• Wrap-around

Apron Pattern Design

Select from a variety of apron designs under the APRON PATTERN DESIGN section.

If you have a custom IMAGE, please send it to service@akiconshop.com

STRAP AND RIVET OPTIONS:

• * 5, 4, 3, 2, or no straps on the hood
•  
• * Rivets placed on some or all straps
•  
• * Small or large rivets placed on the hood apron
•  
• * Custom strap or rivet placement

About AKICON copper products:
 

• Our copper products has been treated with a clear lacquer sealant that is tarnish resistant.
• Do not use copper polish/cleaners, abrasive materials, acidic or abrasive cleaners or harsh chemicals such as acetone, which will compromise the integrity of the integrity of the lacquer finish.

Items you will need:
 

Maintenance process:
 

• Use warm water, mild non-acidic liquid detergent or soap and soft non-abrasive cotton cloth to remove any grease or grime.